/*
======================================================================
envelope.c

Envelope functions for an LWO2 reader.

Ernie Wright  16 Nov 00
====================================================================== */

#include <stdio.h>
#include <stdlib.h>
#include <math.h>
#include <lwo2.h>


/*
======================================================================
lwFreeEnvelope()

Free the memory used by an lwEnvelope.
====================================================================== */

void lwFreeEnvelope( lwEnvelope *env )
{
   if ( env ) {
      if ( env->name ) free( env->name );
      lwListFree( env->key, free );
      lwListFree( env->cfilter, lwFreePlugin );
      free( env );
   }
}


static int compare_keys( lwKey *k1, lwKey *k2 )
{
   return k1->time > k2->time ? 1 : k1->time < k2->time ? -1 : 0;
}


/*
======================================================================
lwGetEnvelope()

Read an ENVL chunk from an LWO2 file.
====================================================================== */

lwEnvelope *lwGetEnvelope( FILE *fp, int cksize )
{
   lwEnvelope *env;
   lwKey *key;
   lwPlugin *plug;
   unsigned int id;
   unsigned short sz;
   float f[ 4 ];
   int i, nparams, pos, rlen;


   /* allocate the Envelope structure */

   env = calloc( 1, sizeof( lwEnvelope ));
   if ( !env ) goto Fail;

   /* remember where we started */

   set_flen( 0 );
   pos = ftell( fp );

   /* index */

   env->index = getVX( fp );

   /* first subchunk header */

   id = getU4( fp );
   sz = getU2( fp );
   if ( 0 > get_flen() ) goto Fail;

   /* process subchunks as they're encountered */

   while ( 1 ) {
      sz += sz & 1;
      set_flen( 0 );

      switch ( id ) {
         case ID_TYPE:
            env->type = getU2( fp );
            break;

         case ID_NAME:
            env->name = getS0( fp );
            break;

         case ID_PRE:
            env->behavior[ 0 ] = getU2( fp );
            break;

         case ID_POST:
            env->behavior[ 1 ] = getU2( fp );
            break;

         case ID_KEY:
            key = calloc( 1, sizeof( lwKey ));
            if ( !key ) goto Fail;
            key->time = getF4( fp );
            key->value = getF4( fp );
            lwListInsert( &env->key, key, compare_keys );
            env->nkeys++;
            break;

         case ID_SPAN:
            if ( !key ) goto Fail;
            key->shape = getU4( fp );

            nparams = ( sz - 4 ) / 4;
            if ( nparams > 4 ) nparams = 4;
            for ( i = 0; i < nparams; i++ )
               f[ i ] = getF4( fp );

            switch ( key->shape ) {
               case ID_TCB:
                  key->tension = f[ 0 ];
                  key->continuity = f[ 1 ];
                  key->bias = f[ 2 ];
                  break;

               case ID_BEZI:
               case ID_HERM:
               case ID_BEZ2:
                  for ( i = 0; i < nparams; i++ )
                     key->param[ i ] = f[ i ];
                  break;
            }
            break;

         case ID_CHAN:
            plug = calloc( 1, sizeof( lwPlugin ));
            if ( !plug ) goto Fail;

            plug->name = getS0( fp );
            plug->flags = getU2( fp );
            plug->data = getbytes( fp, sz - get_flen() );

            lwListAdd( &env->cfilter, plug );
            env->ncfilters++;
            break;

         default:
            break;
      }

      /* error while reading current subchunk? */

      rlen = get_flen();
      if ( rlen < 0 || rlen > sz ) goto Fail;

      /* skip unread parts of the current subchunk */

      if ( rlen < sz )
         fseek( fp, sz - rlen, SEEK_CUR );

      /* end of the ENVL chunk? */

      rlen = ftell( fp ) - pos;
      if ( cksize < rlen ) goto Fail;
      if ( cksize == rlen ) break;

      /* get the next subchunk header */

      set_flen( 0 );
      id = getU4( fp );
      sz = getU2( fp );
      if ( 6 != get_flen() ) goto Fail;
   }

   return env;

Fail:
   lwFreeEnvelope( env );
   return NULL;
}


/*
======================================================================
lwFindEnvelope()

Returns an lwEnvelope pointer, given an envelope index.
====================================================================== */

lwEnvelope *lwFindEnvelope( lwEnvelope *list, int index )
{
   lwEnvelope *env;

   env = list;
   while ( env ) {
      if ( env->index == index ) break;
      env = env->next;
   }
   return env;
}


/*
======================================================================
range()

Given the value v of a periodic function, returns the equivalent value
v2 in the principal interval [lo, hi].  If i isn't NULL, it receives
the number of wavelengths between v and v2.

   v2 = v - i * (hi - lo)

For example, range( 3 pi, 0, 2 pi, i ) returns pi, with i = 1.
====================================================================== */

static float range( float v, float lo, float hi, int *i )
{
   float v2, r = hi - lo;

   if ( r == 0.0 ) {
      if ( i ) *i = 0;
      return lo;
   }

   v2 = lo + v - r * ( float ) floor(( double ) v / r );
   if ( i ) *i = -( int )(( v2 - v ) / r + ( v2 > v ? 0.5 : -0.5 ));

   return v2;
}


/*
======================================================================
hermite()

Calculate the Hermite coefficients.
====================================================================== */

static void hermite( float t, float *h1, float *h2, float *h3, float *h4 )
{
   float t2, t3;

   t2 = t * t;
   t3 = t * t2;

   *h2 = 3.0f * t2 - t3 - t3;
   *h1 = 1.0f - *h2;
   *h4 = t3 - t2;
   *h3 = *h4 - t2 + t;
}


/*
======================================================================
bezier()

Interpolate the value of a 1D Bezier curve.
====================================================================== */

static float bezier( float x0, float x1, float x2, float x3, float t )
{
   float a, b, c, t2, t3;

   t2 = t * t;
   t3 = t2 * t;

   c = 3.0f * ( x1 - x0 );
   b = 3.0f * ( x2 - x1 ) - c;
   a = x3 - x0 - c - b;

   return a * t3 + b * t2 + c * t + x0;
}


/*
======================================================================
bez2_time()

Find the t for which bezier() returns the input time.  The handle
endpoints of a BEZ2 curve represent the control points, and these have
(time, value) coordinates, so time is used as both a coordinate and a
parameter for this curve type.
====================================================================== */

static float bez2_time( float x0, float x1, float x2, float x3, float time,
   float *t0, float *t1 )
{
   float v, t;

   t = *t0 + ( *t1 - *t0 ) * 0.5f;
   v = bezier( x0, x1, x2, x3, t );
   if ( fabs( time - v ) > .0001f ) {
      if ( v > time )
         *t1 = t;
      else
         *t0 = t;
      return bez2_time( x0, x1, x2, x3, time, t0, t1 );
   }
   else
      return t;
}


/*
======================================================================
bez2()

Interpolate the value of a BEZ2 curve.
====================================================================== */

static float bez2( lwKey *key0, lwKey *key1, float time )
{
   float x, y, t, t0 = 0.0f, t1 = 1.0f;

   if ( key0->shape == ID_BEZ2 )
      x = key0->time + key0->param[ 2 ];
   else
      x = key0->time + ( key1->time - key0->time ) / 3.0f;

   t = bez2_time( key0->time, x, key1->time + key1->param[ 0 ], key1->time,
      time, &t0, &t1 );

   if ( key0->shape == ID_BEZ2 )
      y = key0->value + key0->param[ 3 ];
   else
      y = key0->value + key0->param[ 1 ] / 3.0f;

   return bezier( key0->value, y, key1->param[ 1 ] + key1->value, key1->value, t );
}


/*
======================================================================
outgoing()

Return the outgoing tangent to the curve at key0.  The value returned
for the BEZ2 case is used when extrapolating a linear pre behavior and
when interpolating a non-BEZ2 span.
====================================================================== */

static float outgoing( lwKey *key0, lwKey *key1 )
{
   float a, b, d, t, out;

   switch ( key0->shape )
   {
      case ID_TCB:
         a = ( 1.0f - key0->tension )
           * ( 1.0f + key0->continuity )
           * ( 1.0f + key0->bias );
         b = ( 1.0f - key0->tension )
           * ( 1.0f - key0->continuity )
           * ( 1.0f - key0->bias );
         d = key1->value - key0->value;

         if ( key0->prev ) {
            t = ( key1->time - key0->time ) / ( key1->time - key0->prev->time );
            out = t * ( a * ( key0->value - key0->prev->value ) + b * d );
         }
         else
            out = b * d;
         break;

      case ID_LINE:
         d = key1->value - key0->value;
         if ( key0->prev ) {
            t = ( key1->time - key0->time ) / ( key1->time - key0->prev->time );
            out = t * ( key0->value - key0->prev->value + d );
         }
         else
            out = d;
         break;

      case ID_BEZI:
      case ID_HERM:
         out = key0->param[ 1 ];
         if ( key0->prev )
            out *= ( key1->time - key0->time ) / ( key1->time - key0->prev->time );
         break;

      case ID_BEZ2:
         out = key0->param[ 3 ] * ( key1->time - key0->time );
         if ( fabs( key0->param[ 2 ] ) > 1e-5f )
            out /= key0->param[ 2 ];
         else
            out *= 1e5f;
         break;

      case ID_STEP:
      default:
         out = 0.0f;
         break;
   }

   return out;
}


/*
======================================================================
incoming()

Return the incoming tangent to the curve at key1.  The value returned
for the BEZ2 case is used when extrapolating a linear post behavior.
====================================================================== */

static float incoming( lwKey *key0, lwKey *key1 )
{
   float a, b, d, t, in;

   switch ( key1->shape )
   {
      case ID_LINE:
         d = key1->value - key0->value;
         if ( key1->next ) {
            t = ( key1->time - key0->time ) / ( key1->next->time - key0->time );
            in = t * ( key1->next->value - key1->value + d );
         }
         else
            in = d;
         break;

      case ID_TCB:
         a = ( 1.0f - key1->tension )
           * ( 1.0f - key1->continuity )
           * ( 1.0f + key1->bias );
         b = ( 1.0f - key1->tension )
           * ( 1.0f + key1->continuity )
           * ( 1.0f - key1->bias );
         d = key1->value - key0->value;

         if ( key1->next ) {
            t = ( key1->time - key0->time ) / ( key1->next->time - key0->time );
            in = t * ( b * ( key1->next->value - key1->value ) + a * d );
         }
         else
            in = a * d;
         break;

      case ID_BEZI:
      case ID_HERM:
         in = key1->param[ 0 ];
         if ( key1->next )
            in *= ( key1->time - key0->time ) / ( key1->next->time - key0->time );
         break;
         return in;

      case ID_BEZ2:
         in = key1->param[ 1 ] * ( key1->time - key0->time );
         if ( fabs( key1->param[ 0 ] ) > 1e-5f )
            in /= key1->param[ 0 ];
         else
            in *= 1e5f;
         break;

      case ID_STEP:
      default:
         in = 0.0f;
         break;
   }

   return in;
}


/*
======================================================================
evalEnvelope()

Given a list of keys and a time, returns the interpolated value of the
envelope at that time.
====================================================================== */

float evalEnvelope( lwEnvelope *env, float time )
{
   lwKey *key0, *key1, *skey, *ekey;
   float t, h1, h2, h3, h4, in, out, offset = 0.0f;
   int noff;


   /* if there's no key, the value is 0 */

   if ( env->nkeys == 0 ) return 0.0f;

   /* if there's only one key, the value is constant */

   if ( env->nkeys == 1 )
      return env->key->value;

   /* find the first and last keys */

   skey = ekey = env->key;
   while ( ekey->next ) ekey = ekey->next;

   /* use pre-behavior if time is before first key time */

   if ( time < skey->time ) {
      switch ( env->behavior[ 0 ] )
      {
         case BEH_RESET:
            return 0.0f;

         case BEH_CONSTANT:
            return skey->value;

         case BEH_REPEAT:
            time = range( time, skey->time, ekey->time, NULL );
            break;

         case BEH_OSCILLATE:
            time = range( time, skey->time, ekey->time, &noff );
            if ( noff % 2 )
               time = ekey->time - skey->time - time;
            break;

         case BEH_OFFSET:
            time = range( time, skey->time, ekey->time, &noff );
            offset = noff * ( ekey->value - skey->value );
            break;

         case BEH_LINEAR:
            out = outgoing( skey, skey->next )
                / ( skey->next->time - skey->time );
            return out * ( time - skey->time ) + skey->value;
      }
   }

   /* use post-behavior if time is after last key time */

   else if ( time > ekey->time ) {
      switch ( env->behavior[ 1 ] )
      {
         case BEH_RESET:
            return 0.0f;

         case BEH_CONSTANT:
            return ekey->value;

         case BEH_REPEAT:
            time = range( time, skey->time, ekey->time, NULL );
            break;

         case BEH_OSCILLATE:
            time = range( time, skey->time, ekey->time, &noff );
            if ( noff % 2 )
               time = ekey->time - skey->time - time;
            break;

         case BEH_OFFSET:
            time = range( time, skey->time, ekey->time, &noff );
            offset = noff * ( ekey->value - skey->value );
            break;

         case BEH_LINEAR:
            in = incoming( ekey->prev, ekey )
               / ( ekey->time - ekey->prev->time );
            return in * ( time - ekey->time ) + ekey->value;
      }
   }

   /* get the endpoints of the interval being evaluated */

   key0 = env->key;
   while ( time > key0->next->time )
      key0 = key0->next;
   key1 = key0->next;

   /* check for singularities first */

   if ( time == key0->time )
      return key0->value + offset;
   else if ( time == key1->time )
      return key1->value + offset;

   /* get interval length, time in [0, 1] */

   t = ( time - key0->time ) / ( key1->time - key0->time );

   /* interpolate */

   switch ( key1->shape )
   {
      case ID_TCB:
      case ID_BEZI:
      case ID_HERM:
         out = outgoing( key0, key1 );
         in = incoming( key0, key1 );
         hermite( t, &h1, &h2, &h3, &h4 );
         return h1 * key0->value + h2 * key1->value + h3 * out + h4 * in + offset;

      case ID_BEZ2:
         return bez2( key0, key1, time ) + offset;

      case ID_LINE:
         return key0->value + t * ( key1->value - key0->value ) + offset;

      case ID_STEP:
         return key0->value + offset;

      default:
         return offset;
   }
}